TM9-2320-361-10 2-32. OPERATION OF EARTH BORING AND POLESETTING MAINTENANCE TRUCKS (Contd) NOTE If derrick and winch are used to load/unload cable reel, refer to e. of this para. (1) Remove retaining pin (6) and lift collapsible reel (3). (2) Install collapsible reel (3) on rear winch shaft (1) and turn it to the right until shaft dowel pins (2) engage grooves (5) in reel spindle shaft (4). WARNING Ž Ž Ž Make sure collapsible cable reel is properly mounted on rear winch shaft before operating reel. Failure to do so may result in injury or death to personnel. Do not overload cable reel. Maximum pull on reel is 4,000 lb. A snapped cable may cause injury or death to personnel. Wear hand protection when handling cable. Broken cables may cause injury to personnel. Make sure cable ends are secure before installing or removing cable from reel. If cable gets tangled, damage to equipment may result. 2-178 CAUTION