TM 9-2320-361-10 2-32. OPERATION OF EARTH BORING AND POLESETTING MAINTENANCE TRUCKS (Contd) (3) para.). (4) WARNING Wear hand protection when handling winch cable. Broken wires may cause injury to personnel. Pull out cable (2), and rig on sheave (1), as necessary (refer to h. of this Raise derrick (3) as necessary (refer to c. of this para.). TA 51729 (5) Move transfer power takeoff lever (9) up to engaged position and move rear winch control lever (4) forward, to on position. (6) Place power divider control lever (7) in REAR WINCH FWD to wind in load, and REAR WINCH REV to lower load or unwind cable (2). (7) Place transmission gearshift lever (6) in “2” (second) position. (8) Release clutch pedal (5) slowly, and depress accelerator pedal (8) enough to operate winch without racing or stalling engine. 2-164