TM 9-2320-361-10 2-26. OPERATION OF FUEL TANK TRUCK (Contd) (7) Unwind dispensing assembly (6). (8) Remove nozzle (7) from dispenser line (13) and remove filler cover (12) from filler hole (11). (9) Remove padlock (10), lift cover clamp (8), and open manhole cover (9). WARNING Dispenser line should almost touch bottom of tank during filling to decrease the build-up of vapors. Failure to do so may cause fire, resulting in injury or death to personnel. (10) Place dispenser line (13) into tiller hole (11) to bottom of tank. (11) Turn automatic dump valve knob (17), pump delivery line gate valve knob (16), and gravity delivery line gate valve knob (15) counterclockwise to open position. (12) Remove fuel level gage (14). NOTE Ensure parking brake lever is applied. (13) Place transmission gearshift. lever (2) in middle (neutral) position. (14) Start engine (para. 2-14 or 2-15), push clutch pedal (5) in and hold. Place transfer case shift lever (3) in middle (neutral) position. CAUTION Do not allow engine to run with transmission gearshift lever ENGAGED, transfer case shift lever in NEUTRAL, and transfer power takeoff lever in DISENGAGE positions. Failure to do so may result in damage to equipment. (15) Engage transfer power takeoff lever (4), place transmission gearshift lever (2) in “2” (second) position, and release clutch pedal (5). Ensure transfer power takeoff lever (4) is engaged. (16) Slowly pull out hand throttle (1) to run engine at 1150 rpm. Fill tank as needed. Check fuel level with fuel level gage (14). 2-108 Change 2