TM 9-2320-361-10 2-24. OPERATION OF FRONT WINCH (Contd) NOTE Make sure first layer of winch cable goes onto drum in order and that each additional layer starts back across drum. If necessary, use wooden block to assist in cable alinement. (5) When winch cable (8) is fully wound on drum, depress clutch pedal (6), place power takeoff lever (1) in NEUTRAL, and secure with hinge lock (5). (6) Apply parking brake lever (4), and stop engine (refer to para. 2-17). f. Locking Front Winch for Travel. (1) Position cable chain (11) under left frame extension (9), up through left lifting shackle (10), across front of bumper (13), and attach chain hook (14) to right lifting shackle (15). (2) Move clutch control lever (17) toward left side of vehicle to let drum free. (3) Pull drum lock knob (16), rotate it a quarter turn, and release into deep slot on nut. (4) Rotate drum until lock knob (16) plunger slips into nearest hole on drum flange (12). (5) Service snatch block (18) and other equipment used in winching, and stow. (6) To replace shearpin, refer to para. 3-17. Change 3 2-99