2-14. STARTING THE ENGINE (ABOVE +20°F) (-6.7°C) (Contd) h. On earth boring and polesetting model (M764), make sure power divider control lever (12) is in neutral position, and rear winch control lever (8) is disengaged and secured with hinge lock (13). i. Place transmission gearshift lever (10) in “N” (neutral) position. j. Place transfer case shift lever (11) in HIGH or LOW operating range, depending on expected terrain, load, and vehicle speed. k. Push engine stop control (14) in, and turn accessory power switch (15) to ON. l. Depress clutch pedal (9). TM 9-232-361-10 Change 3 2-82.1