TM 9-2320-361-10 2-13. OPERATION UNDER USUAL CONDITIONS INDEX (Contd) PARA. PARA. TITLE PAGE No. NO. 2-28. Operation of Shop Van and Instrument 2-132 Repair Shop Trucks 2-29. Operation of Tractor and Fifth Wheel 2-136 2-30. Operation of Dump Trucks 2-141 2-31. Operation of Pipeline Construction Maintenance 2-147 Trucks 2-32. Operation of Earth Boring and Polesetting 2-159 Maintenance Trucks 2-14. STARTING THE ENGINE (ABOVE +20°F) (-6.7°C) a. Make sure parking brake is applied. Turn knob on end of parking brake control lever (3) to adjust brake cable tension and pull up on parking brake control lever (3) to apply brake. b. Adjust driver’s seat. Refer to para. 2-4. c. Adjust rearview mirrors. Make sure both provide a clear rear view. d. Make sure vehicle front and side windows are clean. e. On vehicles with front winch, make sure transmission power takeoff lever (7) is in “NEU” (neutral) position and secured with hinge lock (6). f. On vehicles equipped with transfer case power takeoff lever (4), make sure lever (4) is pulled back to DISENGAGE position and secured with lock (5). g. On dump model (M342A2), make sure hydraulic control lever (1) is in full up (body down) position and secured with lock (2). 2-82 Change 3