TM 9-2320-209-34-2-3 FRAME 12 1. Take out two capscrews and washers (1) holding shifter fork assembly (2) to worm housing cover (3). 2. Take off shifter fork assembly (2) and washers (4). Be sure not to lose washers (4) between bracket and cover. 3. Take off three capscrews (5) and washers (6). 4. Lift cover (3) off worm housing (7) and throw away gaskets (8). 5. Take off one bushing reducer and air valve (9) from cover (3). 6. Using a hoist, lift shaft and drum assembly (10) off worm housing (7). 7. Drain oil from worm housing (7). 8. Take two pins (11) from cover (3). GO TO FRAME 13 18-84