TM 9-2320-209-34-2-3 FRAME 8 1. 2. 3. 4. 5. 6. Take out setscrew (1) from collar (2). Take off collar (2) from shaft portion of sprocket (3). Take off sprocket (3) and washer (4) from bracket (5). NOTE Do not take out bearing (6) from bracket (5) un- less it is damaged. Refer to para 18-5e for inspection procedures. Take out bearing (6) from bracket (5). Take out two capscrews, washers and nuts (7). Slide bracket (8) off tie rods (9). GO TO FRAME 9 18-80