TM 9-2320-209-34-2-3 FRAME 7 1. 2. 3. 4. 5. 6. 7. Take out setscrew (1) from sprocket (2). Pull sprocket (2) from shaft portion of sprocket (3). Take out key (4). Remove sprocket (3) and washer (5) from bracket (6). NOTE Do not take bushing (7) from bracket (6) unless it is damaged. Refer to para 18-5e for inspection procedures. Take out bushing (7) from bracket (6). Take out four capscrews and washers (8) holding guide plates (9) to carriage assembly (10). Take off two guide plates (9). GO TO FRAME 8 18-79