TM 9-2320-209-34-2-3 FRAME 3 1. 2. 3. 4. 5. Loosen setscrews (1) from collar (2). Take off collar (2) from shaft (3). Pull sprocket (4) with shaft (3) from bracket (5). NOTE If shaft (3) or sprocket (4) is damaged, pull apart shaft from sprocket. Refer to para 18-5e for in- spection procedures. Take off setscrew (6) from sprocket (4) and press shaft (3) off sprocket. Take key (7) off shaft. NOTE Do not take out bushings (8 and 9) from bracket (5) unless they are damaged. Refer to para 18-5e for inspection procedures. Take out bushings (8 and 9) from bracket (5). GO TO FRAME 4 18-75