TM 9-2320-209-34-2-3 FRAME 2 Soldier A Soldier B 1. Place lifting chains around drum shaft. Mate lifting chains to a hoist. 2. Take out eight screws, washers, and nuts (1) joining drumshaft support (2) to mounting frame (3). WARNING Cable tensioner (6) is spring-loaded. When winch assembly is raised, the tensioner will drop to unloaded position. Always stand away when raising winch assembly (4). The cable tensioner can snap back and cause injury to personnel. 3. Guide rear winch (4) off truck and onto work table as soldier B lifts it. 4. Lift rear winch (4) off truck. 5. Take out three screws, washers, and nuts (5), joining cable tensioner (6) to mounting frame (3). 6. Take off cable tensioner (6). END OF TASK 18-72