TM 9-2320-209-34-2-3 18-5. REAR WINCH REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M764). TOOLS: No special tools required SUPPLIES: Lubricating grease, type GAA, MIL-G-10924 Lubricating oil, ICE, OE/HDO 10, MIL-L-2104 Lubricating oil, GO 80/90, Universal Honing stone Crocus cloth, type J Artus shim stock or equivalent Felt washer, pn 11623070 (2) Gasket, pn 7701753 (2) Gasket, pn 7701749 (3) Seal, pn 500156 Seal, pn 11621388 Shear pin, pn 11609886 (3) Link assembly, pn 11623139-2 (2) Spring clip, pn 11609932-2 (2) Rivet, pn MS20613-8P28 Taper pin, pn MS24692-331 PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Remove cab protector. Refer to TM 9-2320-209-20. (2) Remove power divider. Refer to para 18-12. (3) Remove winch drive chain. Refer to para 18-6. (4) Remove reduction drive chains. Refer to TM 9-2320-209-20. (5) Remove winch cable. Refer to TM 9-2320-209-20. (6) Remove carriage cross chains. Refer to TM 9-2320-209-20. 18-70