TM 9-2320-209-34-2-3 FRAME 2 Soldier A 1. Soldier B 2. 3. Soldier A 4. Soldier B 5. Soldier A 6. Soldier B 7. Soldiers 8. A and B 9. END OF TASK Put a load (1) on end of cable (2). Put winch clutch lever (3) toward center of truck. Check that drum lock knob (4) is in unlocked position. Start winch. Refer to TM 9-2320-209-10. Put winch clutch lever (3) toward right side of truck. Raise load (1) with winch, then stop winch. Refer to TM 9-2320-209-10. Winch must hold load. If winch does not hold weight (1), tighten adjusting screw (5) 1/2 turn. Do steps 2 through 6 again until winch holds load (1). If automatic brake overheats, loosen brake adjusting screw (5) 1/2 turn. 18-69