TM 9-2320-209-34-2-3 FRAME 4 1. Put washer (1) on capscrew (2). 2. Put preformed packing (3) on capscrew (2). 3. Put capscrew (2) with washer (1) and preformed packing (3) through housing (4), spring (5), and lugs on brake band (6). 4. Screw in capscrew (2) enough to hold brake band (6). Do not tighten capscrew. 5. Place gasket (7) and cover (8) on housing (4). Aline mounting holes. 6. Put in six capscrews with washers (9). 7. Put in expansion plug (10). GO TO FRAME 5 18-57