TM 9-2320-209-34-2-3 FRAME 10 1. 2. 3. 4. 5. 6. Using soft-faced hammer, tap drive worm (1) until worm and rear bearing (2) drop into gearcase (3) and front bearing is driven out of gearcase. Take out drumshaft (4) with gear (5). Using hammer and brass drift, drive off rear bearing (2). Take drive worm (1) and rear bearing out of gearcase (3). Press gear (5) off drumshaft (4). Take out two keys Press out bearing (7). NOTE Do not take out oil seal (8), unless it is damaged. Refer to para 18-4e for inspection procedures. Take out oil seal (8). END OF TASK 18-46