TM 9-2320-209-34-2-3 FRAME 9 1. Take out capscrew (1), washer (2), and retaining washer (3). 2. Pull drive worm brake disk (4) out of housing (5). 3. Take out key (6) from shaft (7). 4. Take out four capscrews and washers (8). 5. Take off housing (5) and gasket (9). NOTE Do not take out oil seal (10) unless it is damaged. Refer to para 18-4e for inspection procedures. 6. Press out oil seal (10). GO TO FRAME 10 18-45