TM 9-2320-209-34-2-3 FRAME 3 1. 2. 3. 4. 5. 6. 7. 8. Find center of transmission gearshift lever hole (1). Measure 3.25 inches from center of transmission point A and mark as shown. Measure 1.75 inches from point A to point B and Measure 2.75 inches from point B to point C and Measure 4.00 inches from center of transmission point D and mark as shown. Measure 3.25 inches from point D to point E and Measure 2.50 inches from point E to point F and Drill 0.218 inch diameter hole at points, B, C, E, GO TO FRAME 4 gear shift lever hole (1) to mark as shown. mark as shown. gearshift lever hole (1) to mark as shown. mark as shown. and F. 21-201