TM 9-2320-209-34-2-3 FRAME 3 1. Take out bearing with sleeve assembly (1). Take drag brake assembly (2) out of end frame (3). 2. Take out drag brake adjusting screw (4) from rear of end frame (3). NOTE Do not take out oil seal (5) unless it is damaged. Refer to para 18-4e for inspection procedures. 3. Take out oil seal (5). 4. Take out plugs (6 and 7). 5. Take out drum lock assembly (8) from rear of end frame (3). GO TO FRAME 4 18-39