TM 9-2320-209-34-2-3 FRAME 3 1. Put electrical assembly (1) into angle bracket (2) and line up holes. 2. Put in four screws (3). 3. Put angle bracket (2) in place as shown, and line up holes. 4. Put in two screws (4). 5. Put grommet (5) in hole as shown and put wire (6) through grommet. 6. Put in screw (7) with lug (8). 7. Put in screw (9) with three wires (10) as tagged. Take off tags, GO TO FRAME 4 21-136