b. Disassembly. NOTE Tag all wires before taking them off so they will be put back in their right place. FRAME 1 TM 9-2320-209-34-2-3 1. Take off two nuts (1) with washers ( 2). 2. Take out heater motor switch (3) and blower switch (4). 3. Take off six screws (5) from back of heater motor switch (3). 4. Take off connector jumper (6), connector (7), and six wires (8). 5. Take off two screws (9) from back of blower switch (4). 6. Take off two wires (10). GO TO FRAME 2 21-131