TM 9-2320-209-34-2-3 f. General Cleaning, Inspection, and Repair. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well- ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Eye shields must be worn when using compressed air. Eye injury can occur if eye shields are not used. (1) Clean all parts with dry cleaning solvent. Dry with compressed air. (2) Check that all parts are not damaged. (3) If parts are damaged, throw parts away and get new ones. g. Assembly. FRAME 1 1. Put motor (1) in frame (2). 2. Put in four screws (3). GO TO FRAME 2 21-91