TM 9-2320-209-34-2-3 FRAME 6 1. Put igniter ground wire (1) and ground strap (2) in place on burner (3). Screw in and tighten screw, lockwasher, and nut (4). 2. Put ground strap (2) on stud (5). Screw on and tighten nut and lockwasher (6). 3. Put preheat resistor electrical lead (7) on preheat resistor terminal (8). Screw in and tighten screw, lockwasher, and nut (9). GO TO FRAME 7 21-56