TM 9-2320-209-34-2-3 FRAME 2 NOTE Match tags on electrical leads with tags on terminals when connecting electrical leads to terminals. 1. Put bracket (1) with electrical leads on housing (2). Screw in and tighten four screws (3), two on each end of bracket (1). 2. Put two restriction thermostat electrical leads (4) through grommeted hole (5). NOTE Diode (6) must be put back in exactly as it was taken out. Diode has an arrow on it; the arrow points to the end of the holder (7) that has the mark. 3. Snap diode (6) into holder (7). GO TO FRAME 3 21-52