TM 9-2320-209-34-2-3 FRAME 3 1. 2. 3. 4. NOTE Do only those steps needed to put back new parts taken off in frame 2. Parts not called out are for reference only. Put electrical connector (1) with electrical leads in place on bracket (2). Screw in and tighten four screws (3). Put terminal strip (4) in place on bracket ( 2). Screw in and tighten four screws (5). Put diode holder (6) in place on bracket (2). Screw in and tighten two screws (7). Put motor resistor (8) in place on bracket (2). Put in screw (9). Screw on and tighten nut (10). END OF TASK 21-47