TM 9-2320-209-34-2-3 FRAME 6 1. Put in gearcase bushing type bearing (1) and put in three pipe plugs (2). 2. Press rear ball bearing (3) onto worm gear (4) and put worm gear and bearing into housing (5). Soldier A 3. Hold worm gear (4) so that drum shaft assembly (6) and drum shaft gear (7) can be put in. Soldier B 4. Put in drum shaft assembly (6) and drum shaft gear (7). 5. Mesh worm gear (4) with drum shaft gear (7) and put on front ball bearing (8). GO TO FRAME 7 18-26