TM 9-2320-209-34-2-3 FRAME 7 1. Unscrew and takeout screw, lockwasher, and nut (1). Take off preheat resistor electrical lead (2). Pull lead through hole in housing (3). 2. Tag preheat resistor terminal (4). 3. Unscrew and takeoff nut and lockwasher (5). Takeoff ground strap (6). Unscrew and takeout screw, lockwasher, and nut (7). Takeout ground strap (6) and take off igniter ground wire (8). 4. Unscrew and take off two nuts (9). GO TO FRAME 8 21-24