TM 9-2320-209-34-2-3 FRAME 4 1. 2. Plug in three connectors (1) as tagged and take off tags. Put in sealed beam (2). Hold sealed beam (2) in place. Put on mounting ring (3) and tighten three screws (4). NOTE Follow-on Maintenance Action Required: 1. If working on left lamp support bracket, replace blackout drive light. Refer to TM 9-2320-209-20. 2. Put on side panel. Refer to Part 2, para 17-3. 3. Put on brush guard. Refer to para 19-5. 4. Close hood. Refer to TM 9-2320-209-10. END OF TASK 19-40