TM 9-2320-209-34-2-3 g. Replacement. FRAME 1 1. 2. 3. 4. 5. 6. 7. Put brush guard (1) in place. Put in screw (2). Put nut (3) on screw (2) hand tight. Do steps 2 and 3 again for other side of brush guard (1). Lower brace (4) onto screw (5) with washer (6) on outside of brace. Do step 5 again for other side of brush guard (1). Tighten all screws (2 and 5). NOTE Follow-on Maintenance Action Required: 1. If truck has a stone guard, replace it. Refer to Radiator Stone Shield Removal and Replacement, TM 9-2320-209-20. 2. Close hood. Refer to TM 9-2320-209-10. END OF TASK 19-16