TM 9-2320-209-34-2-3 19-5. RADIATOR BRUSH GUARD REMOVAL, REPAIR, AND REPLACEMENT. TOOLS: No special tools required SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Open hood. Refer to TM 9-2320-209-10. (2) If truck has stone guard, remove it. Refer to Radiator Stone Shield Removal and Replacement, TM 9-2320-209-20. b. Removal. FRAME 1 1. Loosen two screws (1) and nuts (2). 2. Do step 1 again on other side of brush guard (3). 3. Move brace (4) back out of the way. 4. Pull brush guard (3) up and off of truck. END OF TASK 19-12