TM 9-2320-209-34-2-3 c. Replacement. FRAME 1 1. Working under truck, put on gasket (1). Lift power takeoff (2) on transmission (3). 2. Put on six nuts (4) and washers (5). Tighten nuts to 30 to 40 pound-feet. NOTE Follow-on Maintenance Action Required: 1. If working on truck M342A2, replace hydraulic hoist pump propeller shaft and yoke. Refer to TM 9-2320-209-20. 2. If working on truck with front winch, replace front winch propeller shaft and yoke. Refer to Transmission Power Takeoff Shaft Linkage Removal and Replacement, TM 9-2320-209-20. 3. Fill transmission. Refer to LO 9-2320-209-12/1. 4. If working on truck with front winch, replace front winch propeller shaft. Refer to TM 9-2320-209-20. 5. If working on truck M342A2, replace hydraulic hoist pump propeller shaft. Refer to TM 9-2320-209-20. END OF TASK 18-276