TM 9-2320-209-34-2-3 FRAME 12 1. Put outer race and roller portion of bearing (1) in end of gear (2). 2. Move shifter fork (3) to catch detent in third slot from front of shaft (4). 3. While holding gear (5) in shifter fork (3) with one hand, put shaft assembly (6) through front of housing (7). 4. Mesh splines of gear (5) with splines of shaft assembly (6). Push shaft assembly into housing (7) until bearing inner race (8) is seated with bearing outer race (1) in shaft (2). GO TO FRAME 13 18-261