TM 9-2320-209-34-2-3 FRAME 6 1. Put spring (1) and detent (2) in shifter fork (3) and hold them in place. 2. Put shifter fork (3) with detent (2) on sliding gear (4) and put them in housing (5). Soldier A 3. Using pry bar, squeeze spring (1) and detent (2). Soldier B 4. Put in shaft (6) threaded end first, through housing (5) and shifter fork (3). Thread shaft into rear of housing. Take out gear (4). 5. Soak packing (7) with oil. Put packing over shaft (6) and seat it in housing (5). GO TO FRAME 7 18-255