TM 9-2320-209-34-2-3 FRAME 4 1. If inner faces of bearings (1 and 2) were taken off shaft bearing sleeve (3), press in new inner races. Place inner bearing spacer (4) between two inner races. NOTE Make sure that each inner race of bearings (1 and 2) is the same distance from end of bearing sleeve (3). 2. Put gear (5) over bearing spacer (4). 3. Put outer bearing spacer (6) and outer race and roller portion of bearings (1 and 2) in gear (5). GO TO FRAME 5 18-253