TM 9-2320-209-34-2-3 d. Cleaning. (1) Clean bearings. Refer to Part 1, para 10-8. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well- ventilated places. Failure to do this may result in injury to personnel and damage to equipment. (2) Clean all other parts in solvent. FRAME 1 1. Check that front end cover (1), pump body (2), and rear end cover (3) are not cracked or broken, and that bores are not scored or worn. 2. Check that 3. Check that teeth. 4. Check that scored. 5. Check that 6. Check that END OF TASK two wear plates (4) have no nicks, burrs or deep scratches. two gears (5) have no nicks, burrs, deep scratches or broken drive gearshaft (6) and driven gearshaft (7) are not cracked or four bearings (8) are not damaged. Refer to Part 1, para 10-8. four pins (9) have no nicks, burrs, or deep scratches. 18-209