TM 9-2320-209-34-2-3 FRAME 2 NOTE Note positions of wear plates (1 and 2) so that they are put back in the same place. 1. Pull off wear plate (1). Take care not to scratch or nick it. 2. Pull out drive shaft assembly (3) and driven shaft assembly (4). Take care not to scratch or nick them. 3. Pull off pump body (5). 4. Pull off wear plate (2). Take care not to scratch or nick it. 5. Using puller, take off two bearings (6). Refer to Part 1, para 10-8. 6. Take out four guide pins (7). GO TO FRAME 3 18-207