TM 9-2320-209-34-2-3 FRAME 3 1. 2. 3. 4. 5. 6. 7. GO Put three piston rings (1) in grooves in piston (2). Turn rings so that ring gaps are not aligned. Put Put Put Put grooved end of piston rod (3) in vise with soft jaw caps. piston (2) on piston rod (3). on nut (4). in cotter pin (5). Clamp piston ring compressor over piston rings (1). Take piston rod (3) out of vise. TO FRAME 4 18-200