TM 9-2320-209-34-2-3 WARNING d. Cleaning. are open. Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well- ventilated places. Failure in injury to personnel. and Clean all parts in solvent. e. Inspection. FRAME 1 to do this may result damage to equipment. Make sure grease and oil passages 1. 2. 3. 4. 5. 6. Check that tube assembly (1) is not cracked and does not have broken welds. Check that inner bore of tube assembly is not scratched or scored, and has no badly worn surfaces. Check that oil passages in tube assembly (1) are not clogged or burred. Check that screw threads are not burred, stripped or crossed. Check that cylinder head (2) and gland (3) are not cracked or broken, and that bores are not burred. Check that piston (4) and three piston rings (5) are not nicked, scratched or cracked, and that they do not have worn surfaces. Check that piston rod (6) is not bent, nicked or scratched, and that it does not have burred, stripped or crossed threads. Check that pin (7) is not chipped or scored, and that it has no flat spots. END OF TASK 18-197