TM 9-2320-209-34-2-3 FRAME 2 1. 2. 3. 4. Join control rod (1) to eyebolt (2). Put pin (3) through control rod (1) and eyebolt (2). Put on cotter pin (4). Place cover (5) on truck body and hold in place with four capscrews (6). 1. 2. 3. 4. 5. 6. 7. 8. END OF TASK NOTE Follow-on Maintenance Action Required: Replace carriage cross chains. Refer to TM 9-2320-209-20. Adjust carriage cross chains. Refer to Carriage Travel Adjustment, TM 9-2320-209-20. Replace winch cable. Refer to TM 9-2320-209-20. Replace reduction drive chains. Refer to TM 9-2320-209-20. Adjust reduction drive chains. Refer to TM 9-2320-209-20. Replace winch drive chain. Refer to para 18-6. Replace power divider. Refer to para 18-12. Replace cab protector. Refer to TM 9-2320-209-20. 18-147