TM 9-2320-209-34-2-3 FRAME 28 1. Put hoist on tie rods (1). Lift carriage level winder assembly (2). 2. Lower carriage level winder assembly (2) on rear winch. 3. Put two capscrews (3) and washers (4) on support (5). 4. Put on capscrew, lockwasher, and flat washer (6). 5. Put on capscrew (7) and washer (8). 6. Take off hoist. 7. Oil all cups on carriage level winder assembly with lubricating oil, type ICE, OE/HDO 10, MIL-L-2104. 8. Grease carriage guide pins and wear plates with automotive grease, type GAA, MIL-G-10924. 9. Put on washer (9) and nut (10). GO TO FRAME 29 18-140