TM 9-2320-209-34-2-3 FRAME 25 1. Place main drive support (1) on end of tie rods (2 and 3). Aline holes in tie rods with holes in support. 2. Join upper tie rod (2) to main drive support (1) with capscrew (4) and nut (5). 3. Join lower tie rod (3) to main drive support (1) with capscrew (6) and nut (7). 4. Put adjusting capscrew (8), washer (9), and nut (10) in main drive support (1). Do not tighten. GO TO FRAME 26 18-137