TM 9-2320-209-34-2-3 FRAME 18 1. Put two straight pins (1) in fork (2). 2. Place key (3) on shaft (4). 3. Place fork (2) between hinge segments of bracket (5). Aline holes. 4. Put shaft (4) through bracket (5) and fork (2). 5. Put in rivet (6) on fork (2). 6. Put on control lever (7). Put in tapered pin (8). 7. If lubrication fittings (9) were taken out, put on new ones. GO TO FRAME 19 18-130