TM 9-2320-209-34-2-3 FRAME 10 1. Put in pin (1). 2. Put brake lining (2) and brake lining plate (3) on worm brake plate (4). 3. Put brake lining (5) and brake lining plate (6) on the first brake lining plate (3). 4. Put two thimbles (7) and spring (8) on brake lining plate (6) and hold in place with pressure plate (9). 5. Holding pressure plate (9) with one hand, put in adjusting bolts (10) with the other hand. Put in adjusting bolts about 1/4 inch into bearing housing. GO TO FRAME 11 18-122