TM 9-2320-209-34-2-3 FRAME 23 1. 2. 3. 4. 5. 6. 7. Take out shim set (1) and spacer (2) from worm (3). Tie shim set together. Tag it. Take out four screws and washers (4) from retaining plate (5). Take off retaining plate (5). Take off and throw away safety wire (6). Take out capscrews (7) from retainer (8). Take off retainer (8) with oil seal (9) and gasket (10). Throw away gasket. NOTE Do not take out oil seal (9) from retainer (8) un- less it is damaged. Refer to para 18-5e for inspection procedures. Take out oil seal (9) from retainer (8). GO TO FRAME 24 18-95