TM 9-2320-209-34-2-3 FRAME 21 1. Slide two lining plates (1) and two brake linings (2) from guide pins (3). 2. Loosen nuts (4) on guide pins (3). Take out guide pins. Take off nuts. 3. Take out two capscrews (5) and washers (6) that hold spacer plate (7) to worm brake (8). 4. Take off spacer plate (7) and gasket (9). Throw away gasket. 5. Pull stop pin (10) from worm brake (8). 6. Loosen worm brake (8) to take off brake from housing. GO TO FRAME 22 18-93