FRAME 1 TM 9-2320-209-34-2-2 WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well- ventilated places. Failure to do this may result in injury to personnel and damage to equipment. b. Cleaning. Clean all parts with dry cleaning solvent. Inspection and Repair. 1. Check that splash shield (1) does not have bends, dents, tears, or holes. Repair by straightening or welding. Refer to TM 9-237 for welding procedures, 2. Check that rubber splash shield (2) is not torn. 3. Check that all threaded parts are not stripped or cross-threaded. 4. Get new parts for damaged parts. END OF TASK 17-851