TM 9-2320-209-34-2-2 17-64. PIPELINE CONSTRUCTION TRUCK BODY REMOVAL, REPAIR, AND REPLACEMENT (TRUCK M756A2). TOOLS: No special tools required SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Clean rags PERSONNEL: Two EQUIPMENT CONDITION: Truck parked, engine off, handbrake set. a. Preliminary Procedures. (1) Remove side racks and endgate. Refer to Operation of Cargo Trucks, TM 9-2320-209-10. (2) Remove rear splash guards. Refer toTM 9-2320-209-20. (3) Unplug taillights and stoplights and take off right rear blackout light mounting bracket. Refer to Taillight and Stoplight Assembly (right side only) Removal and Replacement (Early Model Trucks with Turn Signals) TM 9-2320-209-20. (4) Remove tailboard roller. Refer to Tailboard Roller Assembly Removal, Repair, and Replacement TM 9-2320-209-20. (5) Remove auxiliary roller brackets. Refer to Auxiliary Roller Bracket Assembly, Removal, Repair, and Replacement TM 9-2320-209-20. (6) Remove stiff leg jacks. Refer to Stiff Leg Jack Assembly, Removal, Repair, and Replacement TM 9-2320-209-20. (7) Remove TM 9-2320-209-20. (8) Remove (9) Remove TM 9-2320-209-20. A-frame gin poles and side clamp assemblies. Refer to floorboards. Refer to para 17-62. tool box. Refer to Tool Box Removal and Replacement, 17-754