TM 9-2320-209-34-2-2 WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. c. Cleaning. (1) Clean all parts with dry cleaning solvent. (2) Dry with clean rags. d. Inspection and Repair. FRAME 1 1. Check that doors (1 and 2), two latches (3), two clasps (4), tool box (5), and step plate (6) are not bent, cracked or damaged. Check that they do not have any broken welds. 2. Repair damage by straightening or welding. Refer to TM 9-237. If more repair is needed, get new parts. END OF TASK 17-752