TM 9-2329-209-34-2-2 Dry cleaning near an open nearby when WARNING solvent is flammable. Do not use flame. Keep a fire extinguisher solvent is used. Use only in well- ventilated places. Failure to do this may result in injury to personnel and damage to equipment. c. Cleaning. Clean all parts with dry cleaning solvent. d. Inspection and Repair. FRAME 1 1. 2. 3. GO Check that pulley assembly (1) and support block (2) have no cracks or other damage. Repair cracked parts by welding. Refer to TM 9-237. If pulley assembly is damaged, get a new one. Check that sleeve bearing (3) inside pulley (4) has no nicks, cracks or burrs. Take off raised metal with a fine mill file. If more repair is needed, get a new bearing. Check that inside diameter of sleeve bearing (3) is not more than 1.520 inches. If inside diameter is more than limit given, get a new sleeve bearing. TO FRAME 2 17-718