TM 9-2320-209-34-2-2 h. Test. FRAME 1 1. 2. 3. 4. 5. 6. Draw out and pull back outrigger leg (1) two times. Refer to TM 9-2320-209-10. Draw out outrigger leg (1). Note distance between point A and point B. Wait five minutes, then note distance between point A and point B. If distance between point A and point B is less than distance noted in step 3, do the following: a. Remove outrigger leg. Refer to para 17-54. b. Remove and disassemble outrigger leg hydraulic cylinder. Refer to para 17-55b and 17-55c. c. Inspect and repair outrigger leg hydraulic cylinder. Refer to para 17-55e. d. Assemble and replace outrigger leg hydraulic cylinder. Refer to para 17-55f and 17-55g. e. Replace outrigger leg. Refer to para 17-54. Do steps 1 through 4 again. Pull back outrigger leg. Refer to TM 9-2320-209-10. END OF TASK 17-707