TM 9-2320-209-34-2-2 FRAME 2 1. Put cylinder head assembly (1) on cylinder rod (2). 2. Coat two cups (3) with oil. NOTE When putting back two cups (3), cup flanges must face in opposite directions. 3. Put preformed packing (4) and two cups (3) on rod follower (5). 4. Put retaining plate (6), rod follower (5) with two cups (3), and retaining plate (7) on cylinder rod (2). 5. Put on nut (8) and aline cotter pin holes. 6. Put in cotter pin (9). GO TO FRAME 3 17-704